High Performance Advanced Low Viscosity Polymer Primer For Sealing And To Hold Blast Finish Until A Coating System Is Applied

Product Profile

ProCoat – 9111 is solvent free, 100% solids, low viscosity polymer primer with amine curing system, designed as a penetrating pre-primer. It is ideally suited for use on large metal surface areas that hold the blast until a ProCoat coating system is applied. ProCoat – 9111 increases adhesion of a coating system to metal surface which cannot be blast cleaned to SA2.5 finish. Its excellent chemistry enables it to penetrate through the micro pores of rusty surface and cures to a tough, water resistant coating.  ProCoat – 9111 is ideal as a sealer on aged “white rusted” zinc surfaces and aged pitted steel prior to application of corrosion protection coating system.   ProCoat – 9111 is a choice as a primer for concrete surfaces especially if hydrostatic pressure can be a problem. A thin film of 40 to 50 microns can be applied by a roller or short bristle brush.

Unique Features

  • 100% solids
  • No volatile organic compounds
  • Nil Shrinkage
  • Very low viscosity
  • Penetrates rust
  • Seals concrete pores
  • Primer to concrete if hydrostatic pressure problems

Recommended Few Applications

  • Structural Steel Work
  • Transmission Towers
  • Jetty Structures
  • Drinking / Raw Water Tanks
  • Waste Water & Sewage Tanks
  • Petrochemical Tanks
  • Sewer Pipes
  • Blast Cleaned Pipelines Prior to Coating
  • Concrete Tanks
  • Concrete Surface As Primer
  • Porous Concrete Surfaces
  • Floors